Feedback!

Hawk component weights, compiled by Ron Willoughby

last Updated on 4/29/99 By Ron Willoughby

Part / Description

Weight

(Stock unless noted)

Lbs.

Engine - No oil or carbs

130.0

Frame

19.5

Rear Fender

2.1

Rear Sub Frame

9.5

Swingarm - Bare

9.0

Rear Wheel - No tire

13.0

Front Wheel - No disk rotor

10.2

Rear Shock

7.3

Fox Shock

8.5

Corbin Single Gunfighter Seat

6.8

Centerstand

3.0

Headlight w/aluminum plates

2.5

Rear caliper, master cylinder,

 

Brake lever, footpeg assembly

5.2

Chainguard

0.6

Radiator and fan

3.6

Rear disk rotor

2.4

Front disc rotor

3.7

EBC Pro-lite floating alum rotor

3.6

Sprocket/cush drive w/44t alum

2.3

Rear axle

4.0

Rear caliper mount

1.3

Rear wheel concentric adjuster

2.4

Rubber swingarm guard

0.3

Stock headers

4.5

Rear Fender extension

0.4

TBR muffler

3.4

CB-1 front fender

0.9

Fuel tank

10.0

Seat cowl

2.5

Radiator side covers

0.4

Left footpeg and plate

1.1

Front engine mount bolt

0.9

Shift lever, rod and arm

0.6

DID 520 V O-ring chain

3.7

Steel crossover exhaust pipe

3.5

Coolant tank

0.4

Water hoses (3)

0.8

Fuel lines

0.4

Fuel pump and filter

1.3

Thermostat and spigot

0.8

Petcock

0.3

Ignition coil and wires (each)

0.9

Rectifier

0.8

Sidestand and mount

2.3

Rear engine mounts and bolts

2.6

Wiring harness

5.5

Clutch, throttle and choke cables

1.5

Radiator guard

0.4

Cooling hose guard

0.2

Horn

0.8

Headlight wire mount

0.6

CBR1000 bars

2.5

Fork tube

3.3

Fork lower

1.8

Progressive spring

2.0

Fork Internals

0.8

Fork cap

0.2

Carburator Assembly

4.0